ALTERNATOR DRIVE BELT – Remove & Replace – F250 Super Duty,F350 Super Duty,Diesel,Automatic Trans w/o Dual Alternators – [Includes: Serpentine and V-Belt type Belt(s).]
BATTERY – Remove & Replace – F250 Super Duty,F350 Super Duty Both
FUEL INJECTOR – Remove & Replace – F250 Super Duty,F350 Super Duty One,ALL Both sides
GLOW PLUG – Remove & Replace – F250 Super Duty,F350 Super Duty,6.0L Eng ALL ,Both Sides
HIGH PRESSURE OIL RAIL NOZZLE RESEAL – ALL – Remove & Replace`
Remove cover. Remove old gasket material, drain old fluid. Inspect internals and reassemble with new gasket. Install new fluid to proper level. Road test vehicle for proper operation.
Serviced as requested. Drain, flush and fill transfer case with specified fluid.
Mike W. gave our service a 5 star review on 10/23/2020
2006 Ford Pickup CRM Mitchell1
2020-10-25T22:00:56+00:00
Found P0303, P0316 codes present in ECM. Verified multiple cylinder misfires with a Power balance test. Symptoms and data match Ford TSB #20-2100. Followed testing procedure in TSB #20-2100, and found coolant running down #3 cylinder wall, as well as other cylinders. Per repair recommendation from TSB #20-2100, replace Engine Short Block Assembly. Also has P05A1 code stored – Active Grille Air Shutter A Position Sensor Minimum/Maximum Stop Performance
Fred B. gave our service a 5 star review on 10/21/2020
2018 Ford Escape CRM Mitchell1
2020-10-22T22:02:02+00:00
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Perform basic safety inspection on suspension, brake and engine components.
Lorenzo V. gave our service a 5 star review on 10/17/2020
2017 Chevrolet Impala CRM Mitchell1
2020-10-21T22:00:43+00:00
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – One Side –
Diagnose suspension noise/clunking issue
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
Freight
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber and toe in.
Shawn E. gave our service a 5 star review on 9/3/2020
Engine Codes P0456 – Performed tests on EVAP system and found that the ESIM was faulty, Transmission Codes P07B4, P0807, P1D5C – Used scanner to watch data on transmission everything was within spec. Cleared codes and test drove vehicle. Code P07b4 – returned, performed tests on electrical and found that the Park/Transmission range position sensor is faulty.
PARK POSITION SENSOR – Remove & Replace – Range Sensor
Jason S. gave our service a 5 star review on 8/25/2020